Entries Tagged as 'tidal'

DIY Project: $0 Side Table Makeover

4

12.6.12

Free Table Makeover

Remember the side table I found on the side of the road last week? I got it done over the weekend and worked completely with what I had on hand making this a $0 makeover. But let’s remember how it looked when I rescued it from the trash pile.

Found End Table copy

The table started out it’s lackluster life beat up and scratched sitting on the side of the road. I brought it upstairs and gave it a new home on our deck. I thought about what to do with it for for some time, elicited some reader ideas and even stared up at the spray paint section of Home Depot for at least 30 minutes pondering all the possibilities, nothing jumped out at me so I went home empty handed.

Spray Paint Collection

Valspar Spray Paint

My impatience to get this project started got the better of me which forced me to take a look on the shelf of our shed and found an old unused can of Valsper spray paint in a beautiful pale yellow color that by happy accident coordinated with one of the stripes in our ombre pillows.

Sand to Remove Finish

So I lugged the table downstairs and got down to business sanding it to a smooth finish, first with 100 grit sand paper to remove the finish then followed up with 250 grit sand paper to ensure everything was completely smooth. Note I forgot to attach the dust collector bag to the back of the orbital sander. Yes it took me a while to figure it out, I was COVERED in saw dust. I definitely should have taken a picture of the one, but alas you all will have to use your imaginations.

Staining a Table Top

Then I wiped the whole thing down with a tack cloth and applied 2 even coats of a mixture of Minwax Red Mahogony and Colonial Maple stain with a soft cloth. Letting the stain soak in then rubbing off and reapplying according to the directions.

Prime Table

After the table sat out overnight to completely dry I taped off the table top with newspaper turned the whole thing over and grabbed a leftover can of spray primer in the shed and sprayed 2 thin and even coats of primer over the entire table base waiting in between coats the time indicated on the directions, followed up with a light sanding with 800 grit sand paper and wiped down with a tack cloth to ensure a super smooth top coat.

Spray Paint Table Base

Then the whole process started all over again for the top coat, spraying multiple thin even coats until the entire table base was a nice buttery yellow color. Once dry I flipped the entire table over and added a numerous coats of satin polyurethane to the top of the table sanding between every few coats to get the smoothest finish possible.

Stained top Painted Bottom Table

Not only was this project completely quick and easy. It took about 2 hours over the course of 2 days.

Free Table Makeover

This found table got a makeover using stuff I already had in about 2 hours. If you had to buy the paint the project would come in around less than $20 for the spray paint, stain and sealer.

DIY Outdoor Side Table

Not too shabby for a $0 dollar makeover.

Ombre Pillow Talk

0

05.6.12

Target Stripe Ombre Pillows

On Saturday we went for a quick stop at Target to pick up birthday present for Nikolas’ three year old cousin. We eventually found a present but on the way to the toy aisle I found myself veering off the intended path (as I often do) and spotting the most fantastic coral and orange striped ombre pillows.

Target Stripe Ombre Pillows 2

Ombre and stripes…need I say more? I nearly died in the aisle at the gorgeousness of these pillows and they were on sale for $12.99 (unfortunately they’re not sold online or I’d give you a link ;) ). Score. I thought about it for a quick second, eyed them up again, looked over my shoulder to see if anyone else had spotted them…stalking me about to fly in and snatch them up right under my nose.

Of course, I couldn’t let that happen so in the cart they went and I never looked back.

Target Stripe Ombre Pillows 4

They’re not advertised as outdoor pillows but I think that’s more about what they’re stuffed with rather than the fabric outside. It’s a durable feeling cotton canvas material and because I love them so much I’ve decided they are worth it to keep outside for the summer and bring them in at night and during chance of rain.

Target Stripe Ombre Pillows 3

Did I mentioned they also had a coordinating drink tray? The ex-waitress in me is jumping for joy. The added bit of color is just what I was looking for in this space. I’m loving them so far.

Anyone else make any recent awesome purchases lately. Do you get paranoid at someone might snatch it out of your hands when you find something you really love?  Have you been to Target recently? They had so many amazing things this past weekend I could have brought the whole store home with me.

Well that’s it for me today, talk to you all tomorrow :-)

DIY Project: Deck Planter Boxes

18

01.6.12

Deck Boxes 1

Yup we’re on a mission to makeover our deck space into a great outdoor living space complete with new custom cushions, potted plants and now we are building a few deck planter boxes. But the plan to build didn’t always start out that way.

Deck Boxes 2

First we did a little research in the Planter box aisle of Home Depot. We found a couple nice options here and here, but at the potential cost of either $99 or $159 for each box (we need three) we were convinced we could build them more affordably.

Materials

1 x 6 pine boards
1 x 2 flat stock pine trim
Finishing nails
Paintable caulk
Exterior semi-gloss paint
Sand Paper

Tools
Miter saw
Finish Nail Gun
Electric Sander

The design is nothing more than a pine box with a a few trim pieces added to dress it up. Each board was cut straight across with the miter saw to the desired length, width and 1 board for the bottom of the box.

Deck Boxes 3

As Bryan was building he dry fit them together to make sure they all aligned evenly and scrap piece was placed inside to keep every nice and square while it was nailed together.

Deck Boxes 4

Then using the nail gun Bryan made made quick work of assembling the boxes together by first assembling the sides then attaching the bottom.

Deck Boxes 5

Once the boxes were all assembled we moved onto the top corner trim on three sides. Leaving the trim off the back side will allow the box to mounted tight to the deck rails. Carefully measuring and cutting a 45 degree angle to ensure a tight finished seam helps to dress up the end and cover any unfinished edges.

Deck Boxes 8

After trimming the tops and bottoms we finished it up with three square cut pieces nailed to the front of the box and one on each side.

Deck Boxes 9

Then we sanded the whole thing for a smooth painting surface, caulked the joints with a paintable exterior caulk and finished out the whole thing with a couple coats of Behr Ultra White Exterior paint in Semi-Gloss.

Deck Boxes 10

Finally we drilled a few drainage holes in the bottom of each box.  Now we just need to wait for the final coat of paint to dry, hang the boxes and plant some flowers. All in all it was a relatively easy project and came in around $70 for three boxes as opposed to the $300 minimum price for the same look.

Deck Rail Flower Boxes

Seriously, I love them and I can’t get enough of them. I even enjoy watering them in the morning as I leisurely sip a cup of coffee and enjoy the view.

The geraniums have been growing like little sun loving monsters on steroids. By the time I’m done typing this sentence I’m sure they will have grown 3 more feet ;-) If you would like to see all the details of how we built these guys click here.

I anxious to finish painting the deck rails white. Although, not so anxious to do it while it’s 100 degrees and sunny. At this rate it will probably be September before we get rolling (pun intended) on the painting again.

Adding Potted Flowers to the Deck

16

29.5.12

Deck Flowers 7

Well hello everyone,

Did you all have a great memorial weekend? Ours was wonderful, it included lots of boating, BBQs and all around family fun. I took lots of pictures and will share some of what Memorial weekend is like on the lake in a post later this week.

Aside from the tremendous amounts of boating that took place we also got around to potting some flowers for the deck to bring in some summer color. The deck has already come a long way since we painted the floor, added new cushions and painted out the wicker furniture but in my mind it it would never be close to complete without adding potted plants.  Of course we still need to paint the balusters, we just need to figure out what color we’re going to paint them first ;)

Deck Cushions

Potted plants add a touch of softness to all the hard lines of the deck and furniture.  The plants bring the whole thing together and make it feel more lived in and less sparse.

Deck Flowers 7

Back in the early spring I purchased a few pots from Home Goods, for a great price, each pot was under $20 with the smaller ones being around $10, unfortunately they didn’t have any holes in the bottom. That was easily fixed with a drill and a special masonry drill bit. Terra cotta is really soft and the drill made quick work of the holes adding drainage to those pots. No one likes a soupy mess in their flower pots, especially the flowers.

Deck Flowers 2

Our deck is super sunny so I chose flowers and that can take a good amount of sun and heat. Gerber Daisies happen to be one of my favorites and can also take a good amount of sun provided they’re well hydrated.  A few Vincas were also added in the larger pot to round it out.

Deck Flowers 6

Geraniums and few more Vincas found a home on our new tabletop we built . The lantern Bryan picked up from Target for me and it holds a citronella votive to help keep the mosquitoes at bay. Mosquitoes are unfortunately a fact of living on the lake. The seashell that usually sits inside has made it’s way into the sun.

Deck Flowers 5

Our peonies are full bloom now in the yard. I clipped a few and set them out on the coffee table because they’re just too gorgeous to have only in one spot, and they smell heavenly.

Deck Flowers

I wish you could smell them they are that good.

Peace Lilly

Nikolas has his own little Adirondack chair in the  one shady corner with a Peace Lily tucked into the shade.

Deck Flowers 3

It’s become even more of our favorite spot to sit now.

Deck Flowers 4

Ice tea by the lake anyone?

Replacing an Outdoor Glass Table Top

2

07.5.12

Continuing on our little mini deck sprucing adventure Bryan and I recently had an idea to make use of a broken table sitting in the yard. During a wind storm last year this table had turned over smashing the glass top to bits and pieces. Being reluctant to throw it out, it sat in the yard waiting for us to make a decision on what to do with it.

Broken Glass top table

Last Saturday while we were drinking our morning coffee Bryan and I were talking about things we wanted to finish up and the table sitting abandoned in a corner of the yard popped into the conversation. Bryan suggested building a simple wood table top to fit inside where the glass top once sat. He promised it would be quick, cheap and easy made from pine boards and his Kreg Jig. So the plan was born.

A Kreg Jig is it’s a simple but sturdy device for to make pocket holes in wood at any depth. The pocket holes allow you to join parallel board together to form a table top.

Boards

Bryan bought 3, 6 inch by 6 ft pine boards. Our table diameter was 30 inches so he cut the board in half leaving 6, 36 inch pieces. He laid them all out on the work bench.

Kreg Jig

Once he had it laid out the way he wanted it. He clamped each board into the Kreg Jig secured to the workbench and using power screw driver he drilled into the Kreg Jig according to the directions that came with the tool.  Bryan then repeated this for each board, staggering the holes as he went.

joining the table

Once all of pocket holes were done he joined the pieces together with pocket hole screws.

round

We happened to have a round grill mat that was exactly 30 in round so Bryan used that as a guide to draw a circle onto the wood table top. If we didn’t have the grill mat we could have used a piece of string to draw the circle to the desired size. Finally Bryan used a Jig saw to cut out the circle and used a router for the edge to finish it off.

round top

We used some leftover outdoor stain we had in the shed to stain the top.

Table finished

The whole tabletop project cost about $15 for the wood, since we had everything else on hand. Score one for recycling what you have.

Related Posts Plugin for WordPress, Blogger...
12

Theme by Blogmilk   Coded by Brandi Bernoskie

Google